ShurKote™ One Coat Stucco Warranties

Download Printable PDF Form

The following warranty list allows the Builder, Design Professional, General Contractor and Applicator to select the best warranty for the system being applied and the desired protection needed.

System Components for Warranty

1. Wearher Resistive Barrier

2. Cementitious Base Coat*

3. ShurPrime (base coat primer)

4. Acrylic Finish Coat

5. Elastomeric Finish Coat

6. Approved Sealants**

7. Tensil Strength Coat***

Duration	Number
2 Year	No. 124
3 Year	No. 1234
5 Year	No. 1235
7 Year	No. 12356
10 Year	No. 12357

•	Base coat can be either ShurKote or UltraKote. Other cementitious base coats may be approved for a coatings warranty only.
**	See the specifications or call technical service at UltraKote.
***	This is an adhesive base and embedded reinforcing mesh applied over the cementitious base coat after it has cured.

As the duration of the system warranty increases the requirements for that specified system also increase. To receive the additional warranty protection it is required that additional precautions as well as additional responsibilities must be taken.

For all questions please call the local distributor of ShurKote Products and they will either answer your questions or they will refer you to the technical department at UltraKote Products, Inc.

UltraKote Products, Inc. 327 27th Ave. Phoenix AZ 85009
Office - 602-272-5830 Fax - 602-272-6445