• 1 Framing
  • 2 Approved sheathing
  • 3 Secondary Moisture Barrier
  • 4 EPS Foam Insulation
  • 5 Fasteners and Polypropylene Disc Washers
  • 6 Ultrakote Reinforcing Mesh
  • 7 Basecoat Shurkote DB ™ & Shurkote WB ™
  • 8 Ultraprime
  • 9 Ultrakote Finished Duratex & Duratex HP

System Details

The Ultrakote WM (Water Managed) EIFS (Exterior Insulation Finishing System) is designed to channel any incidental moisture, should it ever occur, away from the wall cavity. The primary difference from the PB system is the application of a secondary moisture barrier and channels for moisture drainage. The WM system still offers the design professional all the desirable features of flexibility, lightweight, and high insulation values.


Base Coats/Adhesives:

A cement and acrylic polymer based product in 50 lb bag that is used as an adhesive for EPS insulation board to an approved substrate and a base coat to embed reinforcing mesh. Covers approximately 90 square feet.
A 100% polymer based product in a 5-gallon pail that when mixed with portland cement is designed to be an EPS insulation board adhesive and base coat. Covers approximately 180 square feet.
A 100% acrylic based material that is designed to be an EPS insulation board adhesive. Coverage is approximately 200 square feet per 5-gallon pail.

Reinforcing Mesh:

Specially woven, alkali resistant gloss fiber reinforcing mesh used with Ultrakote basecoats to provide impact resistance and strength. Available in standard 4.5 oz, 6 oz, 11 oz and 20 oz 38” rolls and starter mesh in 4.5 oz 9″ x 150′ rolls.


A premium 100% acrylic protective exterior primer that can be used to protect most exterior surfaces including stem and foundation walls, stucco and EIFS and efectively reduces eorescence. Coverage varies depending on surface being coated.


A 100% acrylic polymer finish designed to achieve a variety of textures (fine, medium, coarse, swirl and speciality) using various application procedures. Coverage varies from 80 – 130 ft2 depending on application and texture.
A premium, integrally colored acrylic-elastomeric based textured finish coating to be used over a myriad of base coats including Ultrakote’s One Coat and Pre Mix stucco products. Duratex High Performance is a ready mixed aggregated finish material available in multiple color and textures. All Ultrakote’s finishes contain additives to resist mildew, algae and fungus.