WM-RA EIFS

1 Framing
2 Approved Sheathing
3 Shurguard RA Moisture Barrier
4 Basecoat Applied in Vertical Ribbons Shurkote DB ™ & Shurkote WB ™
5 EPS Foam Insulation
6 Basecoat Shurkote DB ™ & Shurkote WB ™
7 Ultrakote Reinforcing Mesh
8 Ultraprime
9 Ultrakote Finish Duratex ™ & Duratex HP ™

System Details

The Ultrakote WM-RA (Water Managed – Roller Applied) EIFS is designed to channel any incidental moisture, should it ever occur, away from the wall cavity. The primary difference from the WM system is the use of the roller applied secondary moisture barrier Shurgard RA to the sheathing. In addition, the system is adhesively applied with vertical bands of adhesive base coat, eliminating mechanical attachment and promoting drainage.

Components

Base Coats/Adhesives:

SHURKOTE DB™

A cement and acrylic polymer based product in 50 lb bag that is used as an adhesive for EPS insulation board to an approved substrate and a base coat to embed reinforcing mesh. Covers approximately 90 square feet.

SHURKOTE WB™

A 100% polymer based product in a 5-gallon pail that when mixed with portland cement is designed to be an EPS insulation board adhesive and base coat. Covers approximately 180 square feet.

SHURKOTE ACRYLIC ADHESIVE

A 100% acrylic based material that is designed to be an EPS insulation board adhesive. Coverage is approximately 200 square feet per 5-gallon pail.

Reinforcing Mesh:

ULTRAKOTE REINFORCING MESH

Specially woven, alkali resistant gloss fiber reinforcing mesh used with Ultrakote basecoats to provide impact resistance and strength. Available in standard 4.5 oz, 6 oz, 11 oz and 20 oz 38” rolls and starter mesh in 4.5 oz 9″ x 150′ rolls.

Primer:

ULTRAPRIME

A premium 100% acrylic protective exterior primer that can be used to protect most exterior surfaces including stem and foundation walls, stucco and EIFS and efectively reduces eorescence. Coverage varies depending on surface being coated.

Finishes:

DURATEX

A 100% acrylic polymer finish designed to achieve a variety of textures (fine, medium, coarse, swirl and speciality) using various application procedures. Coverage varies from 80 – 130 ft2 depending on application and texture.

DURATEX HIGH PERFORMANCE

A premium, integrally colored acrylic-elastomeric based textured finish coating to be used over a myriad of base coats including Ultrakote’s One Coat and Pre Mix stucco products. Duratex High Performance is a ready mixed aggregated finish material available in multiple color and textures. All Ultrakote’s finishes contain additives to resist mildew, algae and fungus.